FAQ

• "No screens to display (or enabled)! comes up when I hit "Start/Stop"?
  • You need to go into the Screen builder and "LOAD" a set of screens, or make your own. There may also be a logic error in your screen file that forces the screens to a group or something, however all the screens in that group may be disabled...
• How do I get a GPO to activate when I have mail?
  • You will need two evetns for this, one to turn it on, and one to turn it off again, create the first event as so:-
    • Event "Sys->On Mail In"
    • Event parameters "Account name" (Select which account to check, or Any account)
    • Action "Gpo->On"
    • Action parameters "1" (or which ever GPO you would like to activate)
  • The second event should be as follows :-
    • Event "Sys->On No Mail"
    • Event parameters "Account name" (Select which account to check, or Any account)
    • Action "Gpo->Off"
    • Action parameters "1" (or which ever GPO you would like to activate
• When the LCD is scrolling the text, is too faint to read?
  • Go in to the LCDC configuration screen and increase the screen contrast by 5% and try again.
• When the LCD is scrolling the text, it is too dark and hard to read?
  • Go in to the LCDC configuration screen and decrease the screen contrast by 5% and try again.